| Clients can avail from us, exclusively made Distribution Transformers. These Distribution Transformers find their uses in the steel plants and materials handling plants. Our Distribution Transformers are appreciated for their perfect functionality and are highly demanded in the market. Our Distribution Transformers are heavy duty and are available at reasonable prices. |
Application
Distribution transformer are used as auxiliary transformer are widely used in various steel plants, materials Handling plant where so many 3- phase Induction motor are used in Rolling Mill, Distribution Transformers are used for Heavy duty large capacity 3-phase Induction motor are used. ln factory Machineries load as well as lighting load is provided with Distribution Transformer. |
Design Parameters
 High factor of safety
Robust design
Low power consumption
High mechanical strength to withstand the symmetrical fault
Efficient voltage regulation
Well power transfer capacity and efficiency
Efficient winding & oil temperature rise
Well voltage regulation
|
Construction
Follow up the clearance with due respect of voltage class in accordance with IS·2026
Use of M.S core clamp with acid treatment, fine surface finishing and oil resistant painting
Use of strain less steel flitch plate core stud clamping rod by proper machining for obtaining the require dimensions
Use of M.S. Fabricated tank of every part fine surface finishing, robust support with stiffeners with acid treatment and painted after sand blasting
Prime core of 0.27 mm thickness with 1.6 wb/mz proper laminated core used at assembly stage and stiffen with poly glass tape by Iron pressed, Copper conductors & bar of 99.9 % Electrolytic grade copper with good conductivity used for making winding and insulated with paper
insulating materials & wooden supports with well tested & high tensile strength good toughness
Brazing rod for copper bar connection of 42 % Rupatam is used ix) linier Flange type 0.L.T.C is fitted for require amount of voltage out put
Permawood Ring for winding pressure, Wooden platform at Bottom side for uniform support
Wooden Bracket support on both primary & secondary side for connection Arrangement. Wooden bolts are used with wooden nut for proper joining
W.T.I C.T and N.C.T. on Both or either side with wooden bracket arrangement
After heating Adhesive used to avoid looseness
Pre-compressed board is used for making Cylinder, Ductstrip, Dove-tail support
Insulated core bolt with glass and M.S. Washer fitted with glass tube
|
Range
Upto 16Mva 33 KV/433V and 11 KV/433V fitted with off circuit tap changing switch, or O.L.T.C. |
